Dump body model

50 Series
Smooth Crossmemberless Bodies
100 Series
Stacked Understructure Bodies

Specific to the 184U

All Godwin bodies are constructed of 10 gauge ASTM-A 607 grade 50 material or equal. To help our bodies maintain their durability and long life, black powder coating over a zinc powder coat primer is standard equipment. A 24” cab shield is also standard equipment on the 184U.
Double acting tailgate with drop pin upper hardware
Optional drop sides in the down position. The side easily unlatches with a single handle and folds down lower than the body floor. Body shown with additional options.
Optional quick release upper tailgate hardware


  • Body lengths 8’,9’,10’ and 11’
  • Inside width is 84”
  • One piece sides with no welded seams.
  • 10 gauge A607 grade-50 high tensile steel with boxed top rail and fully welded boxed rear corner post.
  • 6” side board gussets with full length rub rails, and box-type side braces.
  • Full length 45 degree deflector panels are an integral part of the sides.
  • 10 gauge -two piece high tensile steel floor with 2” floor to side radius.
  • A607 grade-50 steel.
  • 10 gauge high tensile A607 grade 50 steel.
  • Full width integral inverted V-type horizontal bracing.
  • 3 Panel fully boxed 10 gauge high tensile A607 grade 50 steel with boxed horizontal reinforcements and sloping lower deflector.
  • Tailgate is 6” higher than side.
  • Heavy duty: Standard upper hardware is offset cast steel hinge.
  • Lower hook is cast steel: engages tailgate pin from top. Banjo eye keeps tailgate chain in position you select.
  • FMVSS 108 lights are standard, recessed for protection, rubber mounted and shock proof.
  • Completely jig built with 3” structural channel crossmembers on 12” centers and 5” structural channel longitudinal.
  • Crossmembers are gusseted and welded to longitudinals.
  • 36” cab shield, 8 gauge sides, 3/16” one piece floor, fold down 13” sides, 18” sides, Zinc powder primer, quick release upper hardware.